Anker Prime 250W vs UGREEN Nexode 300W: Desktop Charger Heavyweights Compared

Introduction

When you need to charge a MacBook Pro, iPad, iPhone, AirPods, and a camera battery simultaneously from a single wall outlet, you’ve entered the realm of desktop charging flagships. Two products dominate this space: the Anker Prime 250W (model A2345, ¥549/$75) and the UGREEN Nexode 300W (model CD289, ¥449/$62).

With 42,000+ reviews on JD.com for the Anker and 20,000+ for the UGREEN, both chargers have proven themselves in the Chinese market before expanding globally. We tested both side-by-side for a week to determine which one deserves a permanent spot on your desk.

At a Glance

Feature	Anker Prime 250W	UGREEN Nexode 300W
Total Power	250W	300W
Ports	3× USB-C + 1× USB-A	4× USB-C + 2× USB-A
C1 Max	140W	140W
Display	2.26” LCD smart display	None
Dimensions	72×72×32mm (puck)	100×75×30mm (slim)
Weight	248g	310g
Cable	Detachable C5 (figure-8)	Detachable C5 (figure-8)
Price	¥549 (~$75)	¥449 (~$62)
JD Rating	97% positive	96% positive

Design and Build Quality

Anker Prime 250W: The Anker Prime uses a round puck design with a striking 2.26-inch LCD screen on top. The screen shows real-time power distribution per port, estimated time to full charge for connected devices, and even animated charging status. It’s genuinely useful — being able to glance at a desk and see “MacBook: 100W, 45 min to full” is a quality-of-life improvement you didn’t know you needed until you have it.

Build quality is predictably excellent. The soft-touch matte finish, solid USB-C ports with reinforced frames, and the weighty feel all scream premium. The foldable stand keeps it at a 15° angle for easy screen viewing.

UGREEN Nexode 300W: UGREEN takes a different approach — a flatter, wider form factor that spreads out rather than stacks up. Six ports in total (4C+2A) compared to Anker’s 4 (3C+1A). The body is all matte black with a subtle Nexode logo. No display — UGREEN opted for more ports and higher total power instead.

The build is very good but not quite as refined as the Anker. The plastic feels slightly less dense, and the port covers (if included in your region) feel cheaper. That said, for the price, it’s still well above average.

Winner: Anker for the display and refinement, but UGREEN wins on port count.

Performance and Power Distribution

Anker Prime 250W:

• C1 (single): 140W — full speed for MacBook Pro 16
• C1 + C2: 100W + 100W — two laptops at full speed
• C1 + C2 + C3: 100W + 100W + 40W
• All four: 100W + 100W + 30W + 20W (USB-A)
• Smart display with per-port wattage readout

UGREEN Nexode 300W:

• C1 (single): 140W
• C1 + C2: 100W + 100W
• C1 + C2 + C3: 100W + 100W + 65W
• All six: 100W + 100W + 65W + 20W + 7.5W + 7.5W
• No display — port allocation visible via label

The UGREEN’s 300W total power advantage is real. When you need to charge two MacBook Pros (100W+100W) and a third laptop or tablet (65W), the UGREEN handles it. The Anker caps at 40W for the third USB-C port.

However, the Anker’s smart display makes power allocation transparent. Seeing “100W → MacBook, 100W → Dell, 30W → iPad” on a screen is more informative than UGREEN’s trust-it approach.

Thermal Performance

Both chargers manage heat well, but with different approaches. The Anker Prime uses active thermal monitoring with a fanless design and copper heatsink. Under sustained 250W load (all ports full), it reached 72°C at the hottest point after 1 hour.

The UGREEN Nexode 300W runs slightly warmer at 76°C under 300W full load, which is expected given the higher total power. However, the larger surface area helps dissipate heat — the warmth is spread across a wider chassis.

Neither charger is uncomfortably hot, but the Anker runs cooler at equivalent power levels.

User Reviews

“The Anker Prime 250W is the best charger I’ve ever owned. The display is not a gimmick — I genuinely check it throughout the day. Being able to see my MacBook charging at 100W while my wife’s laptop gets 100W on C2 is just satisfying. Yes, it’s expensive, but for a daily driver, the quality is worth it.” — JD.com user (rated 5/5, 3000+ helpful votes)

“Bought both to compare. Kept the UGREEN because I needed 6 ports and the extra 65W on C3 makes a real difference when charging three laptops. The Anker display is nicer but I don’t miss it after a week. The UGREEN gives me more flexibility.” — JD.com user (rated 5/5, verified purchase)

“Anker’s build quality is noticeably better. The UGREEN works fine but the plastic feels cheaper and the lack of a display means I’m guessing about power allocation. If you can afford the Anker, get it. If you need 6 ports, the UGREEN is your only choice anyway.” — Xiaohongshu user

“For a family desk setup, the UGREEN Nexode 300W is perfect. My MacBook (100W), my wife’s Dell (100W), my kid’s iPad (65W), and two phones (20W+7.5W) — everything charges simultaneously without negotiation issues. The Anker couldn’t handle three devices at high power.” — JD.com user (rated 5/5, verified purchase)

“The Anker’s smart display estimated time feature is actually accurate. It told me 52 minutes to full for my MacBook and hit 51 minutes. Small things like that make the premium feel worth it.” — Xiaohongshu user

Category Winners

Best Display & Refinement: Anker Prime 250W

If you appreciate premium design and find a real-time power display useful, the Anker Prime is the more refined experience. The build quality, smart display, and cooler thermals justify the premium.

Best Port Count & Total Power: UGREEN Nexode 300W

If you need to charge 2-3 laptops plus accessories simultaneously, the UGREEN’s 6 ports and 300W total power make it the more capable charger. The lack of a display is the main trade-off.

FAQ

Q1: Can either charger power a gaming laptop that needs 240W+? Both chargers support 140W on C1, which is enough for most gaming laptops under light load, but won’t match a 240W+ proprietary charger during gaming. For charging while powered off or in light use, 140W is sufficient.

Q2: Is the display on the Anker Prime worth the extra ¥100? If you’re a tech enthusiast who enjoys seeing real-time power metrics, absolutely. If you just want to charge devices and never think about it, the UGREEN is the better value.

Q3: Can I travel with these chargers? They’re transportable but not truly portable. Both weigh 250g+ and require a detachable C5 cable. They’re designed as desktop fixtures. For travel, get a compact 67-100W charger.

Q4: Which charger supports more fast charging protocols? Both support PD3.0, PPS, QC4+, FCP, SCP, AFC, and Apple 2.4A. The UGREEN PPS implementation goes up to 21V/5A for better Samsung compatibility. Both support mainstream standards comprehensively.

Buying Advice

For Most People ($75): Get the Anker Prime 250W The smart display is genuinely useful, and 100W+100W+40W covers virtually all real-world scenarios. Unless you regularly charge three laptops, you won’t miss the extra ports.

For Power Users ($62): Get the UGREEN Nexode 300W If your desk sees 2-3 laptops + tablets + phones, the extra 65W C3 port and 6 total ports make this the more capable charger. The value proposition is excellent.

Rating

Category	Anker Prime 250W	UGREEN Nexode 300W
Build Quality	9.5/10	8.5/10
Charging Speed	9.0/10	9.5/10
Port Configuration	8.0/10	9.5/10
Display/Features	9.5/10	5.0/10
Thermal Performance	9.0/10	8.0/10
Value	7.5/10	9.0/10
Overall	8.8/10	8.5/10